Installation Steps How to install Stonewrap® manufactured stone

Here is the way to be followed in order to get the best results with installation of Stonewrap® manufactured stone veneer. Please follow this instruction carefully since you’ll be installing your Stonewrap® stone veneer only once to use it for decades to come. Stonewrap® manufactured stone is actually very easy to install, and if suggestions herel are followed, you’ll obtain surfaces you’ll take delight in looking at for years and years.

Spread Stonewrap® glue with an adhesive trowel over suitable surface.

Apply glue also on the back side of stones, particularly in outdoor installations.

Select the appropriate color from Stonewrap® Joint mortar range and fill the joints with this joint mortar by using a grout bag.    

Apply the joint grout according your desired effect.

Clean out excess mortar before it dries completely.

Clean joint mortars and surface of the stone using soft and clean brush. Apply Stonewrap® water repellent on clean surface that has fully dried. 


The videos here are prepared for installation Stonewrap products correctly. Please watch the videos for the best results for your stone and brick cladding.